BendPak Info + Warranty
BendPak is the world's leading distributor of car lifts and automotive service equipment because they offer the highest quality products, best service after the sale and most impressive delivery speeds, all while holding fast to the strongest company culture in the industry. Wurth USA has been proud to offer Bendpak products since 2024.
WARRANTY INFORMATION
Two-Post Lift + Four-Post Lift Limited Warranty
- Five Years (60 Months) Warranty on the lift structure
- Two Years (24 Months) Warranty on the hydraulic cylinder(s) and power unit
- One Year (12 Months) Warranty on operating components
- One Year (12 Months) Warranty on electrical components (excluding power unit)
- One Year (12 Months) Labor Warranty on site or at factory
- One Year (12 Months) Free Shipping on ground-freight charges related to warranty performance
Portable/Mobile Column Lift Limited Warranty
- Three Years (36 Months) Warranty on the lift structure
- One Year (12 Months) Warranty on the hydraulic cylinder(s) and power unit
- One Year (12 Months) Warranty on operating components
- One Year (12 Months) Warranty on electrical components (excluding power unit)
- One Year (12 Months) Labor Warranty on site or at factory
- One Year (12 Months) Free Shipping on ground‐freight charges related to warranty performance
Commercial Parking Lift Limited Warranty
- Two Years (24 Months) Warranty on the lift structure
- One Year (12 Months) Warranty on the hydraulic cylinder(s) and power unit
- One Year (12 Months) Warranty on operating components
- One Year (12 Months) Warranty on electrical components (excluding power unit)
- One Year (12 Months) Labor Warranty on site or at factory
- One Year (12 Months) Free Shipping on ground‐freight charges related to warranty performance
Air Compressor Limited Warranty
- Five Years (60 Months) Warranty on the compressor tank
- Two Years (24 Months) Warranty on the compressor pump
- One Year (12 Months) Warranty on operating components
- One Year (12 Months) Warranty on electrical components
- One Year (12 Months) Labor Warranty on site or at factory
- One Year (12 Months) Free Shipping on ground‐freight charges related to warranty performance
Wheel Service Equipment Warranty
- Two Years (24 Months) Warranty on equipment structure
- One Year (12 Months) Warranty on operating components
- One Year (12 Months) Labor Warranty on site or at factory
- One Year (12 Months) Free Shipping on ground‐freight charges related to warranty performance
Shop Equipment Warranty
- One Year (12 Months) Warranty on equipment structure
- One Year (12 Months) Warranty on operating components
- One Year (12 Months) Free-Shipping on ground‐freight charges related to warranty performance
Electric/Hydraulic Power Units Warranty
- One Year (12 Months) Warranty on electric motor and switches
- One Year (12 Months) Warranty on pump, hydraulic seals and valves
- One Year (12 Months) Warranty on operating components
- One Year (12 Months) Free Shipping on ground‐freight charges related to warranty performance
Low-Rise Lift + Mid-Rise Lift Limited Warranty
- Two Years (24 Months) Warranty on the lift structure
- One Year (12 Months) Warranty on the hydraulic cylinder(s) and power unit
- One Year (12 Months) Warranty on operating components
- One Year (12 Months) Warranty on electrical components (excluding power unit)
- One Year (12 Months) Labor Warranty on site or at factory
- One Year (12 Months) Free Shipping on ground‐freight charges related to warranty performance
Full-Rise Scissor Lift Limited Warranty
- Two Years (24 Months) Warranty on the lift structure
- One Year (12 Months) Warranty on the hydraulic cylinder(s) and power unit
- One Year (12 Months) Warranty on operating components
- One Year (12 Months) Warranty on electrical components (excluding power unit)
- One Year (12 Months) Labor Warranty on site or at factory
- One Year (12 Months) Free Shipping on ground‐freight charges related to warranty performance
Rolling Bridge Jack Limited Warranty
- One Year (12 Months) Warranty on the lift structure
- One Year (12 Months) Warranty on the hydraulic cylinder(s) and power unit
- One Year (12 Months) Warranty on operating components
- One Year (12 Months) Labor Warranty on site or at factory
- One Year (12 Months) Free Shipping on ground‐freight charges related to warranty performance
Tube/Pipe Bender Limited Warranty
- Five Years (60 Months) Warranty on equipment structure
- Two Years (24 Months) Warranty on hydraulic cylinders
- One Year (12 Months) Warranty on operating component
- One Year (12 Months) Warranty on electrical components
- One Year (12 Months) Labor Warranty on site or at factory
- One Year (12 Months) Free Shipping on ground‐freight charges related to warranty performance
Spray Wash Cabinet Warranty
- Five Years (60 Months) Warranty on the cabinet structure
- One Year (12 Months) Warranty on operating components
- One Year (12 Months) Labor Warranty on site or at factory
- One Year (12 Months) Free Shipping on ground‐freight charges related to warranty performance
Workbenches Warranty
- Five Years (60 Months) Warranty on chest, cabinet, side cabinet or workbench structure
- Two Years (24 Months) Warranty on moving components
- One Year (12 Months) Free-Shipping on ground‐freight charges related to Warranty performance
To submit a service ticket for support or warranty needs with Bendpak - Click Here
| CONCRETE SLAB REQUIREMENTS: |
|---|
| Bendpak Concrete Foundation Requirements |
Additional Shipping Charges
While Bendpak does offer free shipping within the 48 contiguous states there are few additional costs that certain customers might need to consider.
- Lift Gate Service Required - $95.00
- Residential Shipping Address - $70.00
- 24 Hour Delivery Notice - $12.00
- Limited access address - $70.00
- Please Ship to freight Dock - $45.00
- Forklift Service to Unload - $395.00
*Wurth USA Sales Reps should discuss these options with the customer before placing an order. Any additional shipping charges need to stated in the back office notes.
Returns
Returns must be initiated via Wurth USA Customer Service. Your account number and invoice number will be required.
Credit will be equal to less freight out and back plus a 20% restocking fee.
10% off restocking fee granted to those with an offsetting order.
Q: Is there free shipping on Bendpak items?
A: Yes! Bendpak offers free shipping on all items within the contiguous 48 states.
Q: Do I need a loading dock/forklift to receive Bendpak products?
A: Customers without a loading dock or forklift can request special shipping requests at additional cost. Ask your Wurth rep about these options today!
Q: Does Bendpak have Concrete Slab recommendations for lifts and parking platforms?
A: Yes! Information for minimum slab requirements can be in the pdf below.
Q: Does Bendpak offer set-up and service for items such as lifts, tire machines, parking platforms?
A: Yes! Bendpak offers this service via third party contractors located all over the United States. After sale set up and service can be signed up for via:
Q: Does Bendpak offer annual lift inspections?
A: Yes! Bendpak can help provide contact for local lift inspectors based on your location. Please contact Bendpak at 1-800-253-2363 to set a lift inspection today.
Q: Does Bendpak offer any warranty for the items listed?
A: Yes! Bendpak, Ranger, Autostacker, & QuickJack Warranty information can be found below.
Q: What will Bendpak do about missing or incorrect products and parts?
A: Such claims MUST be made within 30 days of the order’s date of receipt. It is best to inspect your shipment before acknowledging to the carrier that the delivery is complete and in good condition. After 30 days, parts will almost certainly not be replaced, but the sooner a claim is made, the better.
Q: How much would it cost for a professional installer to install my new lift?
A: Several factors can determine the cost of an installer. Below are some approximations that may or may not reflect the actual quotes your installer gives. Two-Post Lift Models 9k – 10k Models / $495.00 - $650.00 12k – 18k Models / $695.00 - $850.00 Four-Post Lift Models 9k Models / $395.00 - $550.00 14k Standard Models / $550.00 - $700.00 14k Alignment Models / $695.00 - $850.00 18k – 27k Standard Models / $795.00 - $950.00 18k – 27k Alignment Models / $895.00 - $1,050.00 35k – 40k Standard Models / $995.00 - $1,150.00 Scissors Alignment Models Scissors Alignment / $850.00 - $1,000.00
Q: How many breaker amps are needed for a tire changer?
A: 25 to 30 amp breakers are needed for tire changers.
Q: Do I need an air compressor to operate the machine?
A: Yes. 125-150 psi is required for our Ranger tire changers. This requires the use of an air compressor.
Q: Does my tire changer use oil?
A: Yes, tire changers ship with 10W oil. Check regularly and adjust to 1-2 drops per cycle.
Q: Does BendPak provide free training to use my balancer or tire machine?
A: No, although our manuals provide step-by-step instructions for proper use. Don't hesitate to contact our technical support team for assistance if needed.
Q: Does hydraulic fluid come with the lifts?
A: Due to current DOT and insurance laws regarding the transport of hydraulic oils (DOT Section 1 - Hazardous Ingredients; DOT Section 2 - Fire and Explosion Hazards and DOT Section 3 - Health Hazards) the required hydraulic fluid is to be supplied by the end-user, only. BendPak lifts are designed to operate using standard 10-weight, non-foaming, non-detergent hydraulic oil or Dexron-III ATF fluid. This is available in virtually any automotive store.
Q: What size circuit breaker does a lift's power unit require?
A: We recommend a 30 amp breaker for your car lift.
Q: Do I need a special floor or foundation to support my new lift?
A: Most residential or commercial foundations are strong enough to support BendPak lifts. However, it is important to adhere to concrete specifications. Failure to do so could cause lift failure resulting in personal injury or death.A level floor is suggested for proper installation and level lifting. With proper shimming, small differences in floor slopes may be compensated for. If a floor is of questionable slope, consider a survey of the site and / or the possibility of pouring a new level concrete slab.Be sure to check your floor for the possibility of it being a post tension slab. In this case, contact the building architect before drilling. Visually inspect the site where the lift is to be installed and verify the concrete is in good condition. If your concrete has cracks or other defects, please consult with a certified contractor before proceeding to install any BendPak lift.Lift owners and end users are responsible for the safe installation of their lift. The figures below represent suggested concrete specifications, but should not be construed as actual requirements for your building, facility or application. Because local and statewide building codes may change and / or vary, always check with the building architect before installation for additional guidance on UBC compliance requirements. In no event shall BendPak Inc. be liable for special, consequential or incidental damages for the misinterpretation of this information. BendPak Inc. reserves the right to make changes to this document without incurring any obligation to notify the public that changes were made.Please consult the attached Concrete Slab PDF for specific information.